Deutsches Elektronen-Synchrotron DESY
A Research Centre of the Helmholtz Association

DESY News: Microscopy Today Innovation Award for novel X-ray lenses

News

News from the DESY research centre

https://www.desy.de/e409/e116959/e119238 https://www.desy.de/news/news_search/index_eng.html news_suche news_search eng 1 1 8 both 0 1 %Y/%m/%d Press-Release
ger,eng
2018/08/08
Back

Microscopy Today Innovation Award for novel X-ray lenses

High numerical aperture and sharp focus enable record resolution microscopy

For a novel X-ray lens with unprecedented properties, a research team headed by DESY group leader Saša Bajt has been awarded the 'Microscopy Today Innovation Award' by the magazine Microscopy Today. The team's “High numerical aperture, high efficiency X-ray lenses” were judged as one of the ten best microscopy innovations in the 2018 competition, and the prize was awarded on Wednesday during the Microscopy & Microanalysis 2018 meeting in Baltimore (USA). Microscopy Today is the official magazine of the Microscopy Society of America (MSA). Team members are Saša Bajt (DESY), Andrzej Andrejczuk (University of Bialystok, Poland), Sabrina Bolmer (DESY), Henry Chapman (DESY and University of Hamburg), Andrew Morgan (DESY), and Mauro Prasciolu (DESY).

Download [521KB, 768 x 1024]
DESY group leader Saša Bajt.
The penetrating nature of hard X-rays and their short wavelengths below about 0.1 nanometres (millionths of a millimetre) make them attractive for imaging of objects such as biological cells at resolutions beyond that of visible light and without sectioning or thinning the sample as needed for transmission electron microscopy. However, these properties of X-rays also make them difficult to focus. One way is to use specialised X-ray optics called multilayer Laue lenses (MLLs). These lenses consist of alternating layers of two different materials with nanometre thickness. In contrast to conventional optics, MLLs do not refract light but work by diffracting the incident X-rays in a way that concentrates the beam on a small spot. To achieve this, the layer thickness of the materials has to be precisely controlled. The layers must gradually change in thickness and orientation throughout the lens.
The novel Multilayer Laue lenses (MLL) are typically 10 to 100 micrometres tall (aperture size), 100 micrometres wide and several micrometres thick (optical depth) with focal lengths of 1 to 10 millimetres. A micrometre is a thousandth of a millimetre. Credit: DESY, Saša Bajt

The scientists made several innovations in the fabrication process to achieve high efficiency and to extend the numerical aperture (NA) far beyond what was previously possible, to enable imaging at spatial resolutions below 10 nanometres, with diffraction efficiencies exceeding 80 per cent. The new lenses consist of over 10 000 alternating layers of a new material combination, tungsten carbide and silicon carbide. To focus an X-ray beam in the vertical and horizontal directions it has to pass through two perpendicularly oriented lenses. By using this set-up, a spot size of 8.4 nanometres by 6.8 nanometres was demonstrated. The resolution of the new lenses is about five times better than achievable with typical state-of-the-art lenses.

 

Reference:
2018 Microscopy Today Innovation Awards; Microscopy Today; DOI: 10.1017/S1551929518000822

Logo der Helmholtz Gemeinschaft

© 2024, Deutsches Elektronen-Synchrotron DESY